Banckert Tug Boat Rebuild - July 2016

Components for this project:

- Used/Unfinished 'Billing Boats' Banckert Model Number 516 boat kit
- Billings motor/gearbox option sold separately with the above kit
- Original 'Billing Boats' build manual and scale drawings
- Mtroniks Waterproof 15Amp ESC (www.mtroniks.net)
- 10Amp UBEC
- *Turnigy 2S – 7.4V LIPO Battery (choice depends on the runtime required)
- Charger – *Hobbyking DC-4S (2 – 4S) Li-Poly/Li-Ion Battery Charger
- Safety Fireproof bag for LiPo charging
- LiPo LED/Buzzer Monitor – Alarm – Tester Module for balance lead
- Turnigy 9X Transmitter and 9X8C-v2 Receiver
- Turnigy TGY1501 high torque servo (for Rudder control)
- 45mm four Blade prop - 4mm r/h thread to suit 'Billings Boats' prop shaft as per original kit
- Highly Recommended - Suitable model boat Bilge Pump (and separate battery)
- Misc small wood lengths – varies sizes as used in wooden model construction
- Misc Wire, Connectors, Leds etc
- Numerous lead weights to set water line (steel could also be used as weights)
*Turnigy and Hobbyking sold by http://www.hobbyking.com

Tools:
- Dermal (or other suitable Multi-rotor hand tools) and tools pieces
- Mushroom hand drill and assorted small drill bits
- All the normal small hand tools used in model construction…..

Paint List:
- Red Humbrol Gloss Enamel 19
- Blue Humbrol Gloss Enamel 14
- Grey Humbrol Satin Enamel 128
- Black Humbrol Satin Enamel 85
- Black Humbrol Matt Enamel 33
- White Humbrol Satin Enamel 130
- White Humbrol Matt Enamel 34
- Metal Humbrol Enamel 191
- RUST - Model Master Enamel code 1785
- Red Nail Polish
- Clear Nail Polish

Glues:
- Hi-Performance Quik-Cure 5 Minute Epoxy (128gm bottles)
- Hi-Performance Mid-Cure 15 Minute Epoxy (128gm bottles)

Misc:
- Acetone
- Paint Thinner
- Paint Brushes Assorted
- Masking tape

For sticking the two halves together:
- High quality thin double sided auto body molding tape
- “U” shaped rubber section to finish the jointing of the two halves.

And any other things I have forgotten!