Скачать или смотреть YAMAHA R15 V3 bike Shock observe ambush barring change

Changing the ambush (or bush) bearing in the shock absorber of a Yamaha R15 V3 requires some mechanical skills and tools. Here’s a step-by-step guide:

Tools and Materials Needed:
1. New bush bearing
2. Socket wrench set
3. Screwdrivers
4. Pliers
5. Hammer and drift punch
6. Lubricant
7. Torque wrench

Steps:

1. *Preparation:*
Park the bike on a stable surface using the center stand or a paddock stand.
Ensure the bike is secure and won’t tip over.

2. *Removing the Shock Absorber:*
Remove the seat and any fairings or panels obstructing access to the shock absorber.
Loosen and remove the bolts securing the shock absorber to the bike’s frame and swingarm using the socket wrench.
Carefully remove the shock absorber from the bike.

3. *Removing the Old Bush Bearing:*
Place the shock absorber on a stable workbench.
Use a drift punch and hammer to carefully tap out the old bush bearing from the shock absorber.

4. *Installing the New Bush Bearing:*
Apply a small amount of lubricant to the new bush bearing.
Align the new bearing with the shock absorber’s mounting point.
Gently tap the new bearing into place using the hammer and drift punch, ensuring it is seated evenly.

5. *Reinstalling the Shock Absorber:*
Position the shock absorber back onto the bike.
Insert and tighten the bolts to secure the shock absorber to the frame and swingarm. Use the torque wrench to tighten the bolts to the manufacturer’s specified torque settings.

6. *Final Checks:*
Reinstall any fairings or panels that were removed.
Ensure all bolts are tightened properly.
Check the shock absorber for proper movement and alignment.

7. *Test Ride:*
Take the bike for a test ride to ensure the new bearing is functioning correctly and there are no unusual noises or movements.

If you're unsure or uncomfortable with any part of this process, it’s best to consult a professional mechanic to avoid any potential issues.