How to Replace Accessory Drive Belt Tensioner 2006-2011 Honda Civic

Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com http://1aau.to/ib/1AEBT00201

This video shows you how to install a new TRQ tensioner pulley in your 2006-2011 Honda Civic. The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off.

This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic

Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/oWm/1AXAA00020
• 12mm Wrench http://1aau.to/oYk/1AXAA00010
• 19mm Wrench http://1aau.to/oYk/1AXAA00010
• 10mm Socket http://1aau.to/obgR/1AXAA00017
• Torque Wrench http://1aau.to/oaJ4/1AXAA00044
• Gloves http://1aau.to/oahA/1AXSS00048
• Safety Glasses http://1aau.to/oaau/1AXAA00343
• 5/16 Inch Allen Wrench http://1aau.to/oT/1AXAA00006
• Pick http://1aau.to/oRA/1AXAA00037

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.