Tesla Model 3 Front Springs Installation HowTo DIY

Описание к видео Tesla Model 3 Front Springs Installation HowTo DIY

Instructional video on how to install new springs onto the Tesla Model 3.

Here are some torque settings courtesy of UP:

nuts used to attach the top mount to the control arm mount - 17 ft⋅lb / 23Nm
2 larger bolts to reattach the control arm mount to the chassis is 46 ft⋅lb / 62Nm
2 smaller bolts to reattach the control arm mount to the chassis is 26 ft⋅lb / 35Nm
Bolt/nut combination for clamp on knuckle to reattach upper control arm ball joint - 41 ft⋅lb / 56Nm
Front sway bar end link nut to damper - 73 ft⋅lb / 98Nm
Recommended Front Pre-Load: 210-220mm from top of spring to Bottom of spring.

Комментарии

Информация по комментариям в разработке

Похожие видео