How to replace the control arms Panda mk3 🚗

BUY THE AUTO PARTS you need for the operation : 👉 http://bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 http://bit.ly/MCD12AppStore, 🤖 : http://bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
Multi-purpose grease : https://maclede12.co/multipurpusegrease

Control arms : https://maclede12.co/control-armsjtc2... and https://maclede12.co/control-armsjtc2...

Penetrating oil : https://maclede12.co/Penetratingoilen

💪 TIGHTENING TORQUES FOR CONTROL ARMS FIAT Panda mk3
Front retaining bolt from the control arm : 57 Nm + 90°
Rear retaining bolt from the control arm : 57 Nm + 90°
Control arm ball joint nut : 65 Nm

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Control arms on a Fiat Panda mk3 .

Discover the world of UseTool EN

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Panda mk3 : https://maclede12.co/toolboxCLASOS3050en 🏆🤖💣

Torx T27 socket
17mm socket
Torx E18 socket
18mm spanner
Socket wrench
Flat head screwdriver
Wheel lug wrench
15mm socket
Pin punch
Phillips screwdriver
Wire brush
Iron bar
Fork tool
Torque wrench: https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS...

🔝💪Safely lift your Panda 3 with the hydraulic jack: https://maclede12.co/jackCLASOH5304en and axle stands: https://maclede12.co/standsCLASOM3002... recommended by UseTool EN 💪🔝

Hydraulic jack
Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
Before presenting the new control arm, grease the holding screws as this will make their reassembly easier and avoid any for of jamming.

Usetool's info
No particular piece of information necessary to carry out this operation

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely :    • How to (PROPERLY) lift your vehicle s...  

[ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel :    • ASTUCE : Pneu crevé ? Déposer et repo...  

[ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 :    • How to (PROPERLY) use a torque wrench? 🔧  

Space Race by tubebackr |   / tubebackr  
Music promoted by https://www.free-stock-music.com

Terms and conditions of the offer : https://www.mister-auto.co.uk/operati...

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:17 Remove the control arm
5:22 Replace the control arm