How to Install Performance Calipers and Rotors for S197 Mustangs (2011-2014)

Описание к видео How to Install Performance Calipers and Rotors for S197 Mustangs (2011-2014)

We are going over the steps to install new aftermarket (Brembo) calipers and drilled & slotted premium brake rotors for a 2012 Mustang GT.

References:
https://performanceparts.ford.com/dow...
https://performanceparts.ford.com/dow...
https://www.coyoteaccessories.com/med...

Tools - 0:24
Step 1 (Loosen Lug Nuts) - 1:06
Step 3 (Remove Wheel & Lug Nuts) - 1:25
Step 5 (Remove Caliper/Guide Pin Bolts) - 2:15
Step 7 (Remove Brake Pads) - 3:02
Step 9 (Remove Rotor) - 3:54
Step 11 (Clean & Install Rotor) - 4:20
Step 13 (Clean & Grease Guide Pins) - 5:12
Step 15 (Install Brake Anchor Plate/Bolts) - 5:58
Step 17 (Rotate Brake Caliper Piston (CW)) - 6:38
Step 19 (Grease & Install New Brake Pads) - 7:32
Step 21 (Torque Guide Pin Bolts (2)) - 8:39
Step 23 (Disconnect Hard Brake Line) - 9:04
Step 25 (Remove Brake Caliper Flow Bolt) - 9:44
Step 27 (Install Brake Line Bracket) - 10:12
Step 29 (Connect Hard Brake Line) - 10:36
Step 31 (Install Brake Caliper Flow Bolt) - 11:03
Step 33 (Verify/Top Off Brake Fluid) - 11:49
Step 35 (Install Bleeder Bottle) - 12:13
Step 37 (Pump Brake Pedal) - 12:29
Step 39 (Remove Bleeder Bottle) - 12:52
Step 41 (Apply Anti-Seize) - 13:06
Step 43 (Torque Wheel Spacer Lugs) - 13:50
Step 45 (Install Wheel & Lug Nuts) - 14:26
Step 47 (Torque Lug Nuts) - 14:50
Step 49 (Lift Vehicle (Front Passenger)) - 15:03
Step 51 (Detach Speed Sensor Clips) - 15:16
Step 53 (Remove Brake Line Brackets) - 15:46
Step 55 (Remove Caliper & Rotor) - 16:38
Step 57 (Install New Dust Shield/Bolts) - 17:11
Step 59 (Clean/Install New Rotor) - 17:46
Step 61 (Install Speed Sensor Clips) - 18:34
Step 63 (Apply Anti-Seize) - 19:19
Step 65 (Install Brake Line Brackets) - 20:10
Step 67 (Attach Speed Sensor to Brake Line) - 20:58
Step 69 (Torque Brake Caliper Flow Bolt) - 21:28
Step 71 (Install Brake Pad Pin) - 22:32
Step 73 (Bleed Inside Bleeder Valve) - 23:34
Step 75 (Bleed Inside Bleeder Valve (Again)) - 24:10
Step 77 (Torque Wheel Spacer Lugs) - 24:26
Step 79 (Lower Vehicle) - 24:51
Step 81 (Repeat for Front Driver Side) - 25:09
Show It Off - 25:53

Brake Parts:
This video contains affiliate links for which I may receive compensation.
Callahan REAR Rotors/Pads/Hardware - https://amzn.to/3676Yij
Callahan FRONT Rotors/Pads/Clips - https://amzn.to/3sYgAoT
Front Brake Dust Shield (BR3Z-2K004-C) - https://www.fordpartsgiant.com/oem-20...
J&M Brake Hoses - https://lmr.com/item/JM-22530/Mustang...
1" Wheel Spacers - https://lmr.com/item/LRS-5450A12K/mus...
BrakeBest Brake Caliper - https://www.oreillyauto.com/detail/c/...
BrakeBest Brake Caliper - https://www.oreillyauto.com/detail/c/...
Brembo Decals - https://amzn.to/3tMQMek

Products Used:
This video contains affiliate links for which I may receive compensation.
Brake Fluid - https://www.amsoil.com/p/dot-3-and-do...
Brake & Parts Cleaner - https://www.amsoil.com/p/brake-and-pa...
Brake Caliper Synthetic Grease - https://amzn.to/3vTNyIQ
Anti-Seize - https://amzn.to/3HZC6NY
Trim Removal Tool Set - https://amzn.to/3hRQA8j
Pin Punch Set - https://amzn.to/34z3rsY.
Torque Wrench (20-200 in-lb) - https://amzn.to/3CriqBH
2-Piece Ruler Set - https://amzn.to/3sV28Om
Semi-Permanent Threadlock - https://amzn.to/3NLSK9D

Bleeder Bottle:
How-to Video -    • How to Make a One Person Brake Bleede...  
Fuel Tubing 1/4" X 3/8" - https://shop.advanceautoparts.com/p/p...

Tools:
Bleeder Bottle/Hose
Torque Wrenches (Req: 7-100 ft-lb)
1/2" Socket Wrench
3/8" Socket Wrench
1/4" Socket Wrench
1/2" Breaker Bar
21mm Socket
10mm Socket
13mm Socket
15mm Socket
10mm Wrench
11mm Wrench
13mm Wrench
Needle Nose Pliers
Long Screwdriver
Semi-Permanent Threadlock
Hammer
Punch Pin
Ruler
Shop Towels
Brake & Parts Cleaner
Brake Caliper Synthetic Grease
Anti-Seize
Trim Removal Tool Set
Jack Stands
Jack

Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.

#BrakeUpgrade #Brembo

Комментарии

Информация по комментариям в разработке