Скачать или смотреть Transmission Jacks and Heavy Drivetrain Work

One essential piece of shop equipment is the transmission jack. These jacks support the removal, positioning, and transport of transmissions, transaxles, and other drivetrain components.

BendPak offers the Ranger RTJ-3000 transmission jack for these applications. The unit supports a wide range of drivetrain service work.

Ranger RTJ-3000 Capacity and Applications

The Ranger RTJ-3000 has a rated lifting capacity of 3,000 pounds. The capacity supports typical passenger vehicle transmissions. It also accommodates heavier transmissions found in fleet trucks and vans.

The design allows technicians to handle larger drivetrain components while maintaining stability during lifting and positioning.

Design Features and Stability

The RTJ-3000 uses a double-sealed hydraulic system with a foot-operated pump. It includes a fully adjustable saddle for drivetrain alignment.

The two-stage design provides a maximum lifting height of 71.5 inches. A 34-inch base supports a low center of gravity and improved stability. Four heavy-duty swivel ball-bearing casters allow movement around the shop. A pull handle assists with positioning.

Adjustment and Safety Systems

Steel roller bearings are installed beneath the table and at the ends of the adjustment screws. These components support smoother table movement, including when the jack is under load.

Fine-thread adjustment screws with oversized knobs allow tilt adjustment side to side and front to back. Heavy-duty chain anchors include slide adjustments to support different drivetrain shapes and sizes.

An integrated overload safety system prevents operation beyond the rated capacity.

Garage equipment plays a central role in defining the scope and safety of repair work. Lifting equipment must meet weight and use requirements, particularly as electric vehicles add new load considerations.

One essential piece of shop equipment is the transmission jack. These jacks support the removal, positioning, and transport of transmissions, transaxles, and other drivetrain components.

BendPak offers the Ranger RTJ-3000 transmission jack for these applications. The unit is designed to support a wide range of drivetrain service work.

Ranger RTJ-3000 Capacity and Applications

The Ranger RTJ-3000 has a rated lifting capacity of 3,000 pounds. The capacity supports typical passenger vehicle transmissions. It also accommodates heavier transmissions found in fleet trucks and vans.

The design allows technicians to handle larger drivetrain components while maintaining stability during lifting and positioning.

Design Features and Stability

The RTJ-3000 uses a double-sealed hydraulic system with a foot-operated pump. It includes a fully adjustable saddle for drivetrain alignment.

The two-stage design provides a maximum lifting height of 71.5 inches. A 34-inch base supports a low center of gravity and improved stability. Four heavy-duty swivel ball-bearing casters allow movement around the shop. A pull handle assists with positioning.

Adjustment and Safety Systems

Steel roller bearings are installed beneath the table and at the ends of the adjustment screws. These components support smoother table movement, including when the jack is under load.

Fine-thread adjustment screws with oversized knobs allow tilt adjustment side to side and front to back. Heavy-duty chain anchors include slide adjustments to support different drivetrain shapes and sizes.

An integrated overload safety system prevents operation beyond the rated capacity.

This video is sponsored by BendPak.