How to Put on or Remove Back Paddles on PS5 Dualsense Edge Controller (Fast Tutorial)

Here are instructions for adding or removing back paddles on the PS5 DualSense Edge controller:

Adding Back Paddles:
Step 1: Remove the face cover of the controller. You can do this by gently prying it off.
Step 2: Detach the L1 and R1 buttons from the controller.
Step 3: Unscrew the four screws that hold the controller together.
Step 4: Disconnect the battery, microphone, and the four ribbons from the controller’s board.
Step 5: Replace the side ribbons with the new ones from the kit (if applicable) and reconnect them to the board.
Step 6: Place the new ribbon over the touchpad and reconnect the battery and microphone.
Step 7: Attach the back plate with the screws and rods to the controller.
Step 8: Insert the LED light and power button.
Step 9: Connect the small board to the back plate using the cable and two screws.
Step 10: Reassemble the controller with the L1 and R1 buttons and the face cover.
Step 11: Press the remap button and hold the back paddles and face buttons to assign them.

Removing Back Paddles:
Step 1: Gently pull on the back paddle.
Step 2: Grip the back paddle between two fingers and gently start to pull it away from the controller. Pulling it upwards and towards the edge of the controller usually works best



...

Twitter: https://twitter.com/YourSixStudios?la...
Twitch:   / yoursixstudios  
Discord:   / discord  
Instagram:   / yoursixstudios   -

((( Subscribe to my LIVE STREAMING )))
((( Gaming Channel "YourSixGaming" )))
   / @yoursixgaming   ...

((( Subscribe to my ADVENTURE CHANNEL )))
((( Travel, Cameras & More "YourSixAdventures)))
   / @yoursixadventures