Install of LED Ceiling Mount Light

Removed old fixture and installed a new LED ceiling mount light.
1.First, find and turn off the breaker that supplies power to the light.
2.Verify the new fixture has all its parts before taking the old down.
3.Remove the old fixture, make a note of how the wires were connected to it before you disconnect them. This will help you connect the new fixture correctly, and worst case, allow you to put the old fixture back in service if needed, maybe new one didn't have all the parts(step 2) or something like that.
4. Temporarily connect the frame that comes with the new LED fixture to the junction box and mark locations in ceiling where anchors need to go. Then remove frame and install the anchors on your marks.
5. Attach frame loosely to junction box, get screws that attach frame to anchors started. Slowly tighten everything up until frame is secured to j-box and ceiling.
6. Reconnect wires to the new LED and carefully tuck them into the j-box. Then carefully push the LED part of the fixture into frame and give it a slight turn and it will lock into place.
7. Turn on the breaker, flip the switch and check out your new LED fixture.

🔴 Please SUBSCRIBE to the HWDsouthDIY channel by clicking the link below:
https://www.youtube.com/c/HWDsouthDIY...
And THANK YOU for watching.

🔵 Here are some key parts of the video:
⏩ 00:22 Unboxing the new LED light.
⏩ 00:59 Removing the old fixture.
⏩ 01:14 Mounting the frame for the new LED fixture
⏩ 02:23 Connect wires for new fixture
⏩ 02:50 Connect fixture to frame
⏩ 03:18 Test the new LED light!

✅ When you get a chance here are some of my other videos to check out, thanks.
✔    • LED Light Installs And More   LED Light Installs And More
✔    • Tools Reviewed And Used   Tools In Action

#LED
#lighting
#HWDsouthDIY