How To Add A Plunger To AtGames Legends Pinball Micro!

This video is my easy to follow (hopefully) 10-step tutorial guide to install the Idaho 3D Printing & Design Plunger Kit inside your AtGames Legends Pinball Micro. This Kit retails for $54.99 and I LOVE the finished product once installed! This mini virtual pinball machine was missing a plunger - and now it has one! Let's check it out!

*LINKS/INFO*

Order Idaho 3D Printing & Design Plunger Kit Off Etsy:
https://www.etsy.com/listing/14148400...

Kit provides all materials needed for the installation of a plunger on your ATGames legends pinball micro. Its a very easy install and requires no modifications to your machine and is completely reversible. This plunger acts as an on/off switch only the same as the stock button.

Kit Includes:
Plunger with washers and screw: 1
Hole Spacer: 1
Magnetic switch with integrated mount: 1

TIMESTAMPS
0:00 Intro
0:10 Idaho 3D Printing Plunger Kit
0:59 Step 1 - Remove Front Rail
1:15 Step 2 - Remove Side Rails
1:32 Step 3 - Remove Monitor Screws
3:42 Step 4 - Disconnect Monitor
4:41 Step 6 - Prep Plunger
5:07 Step 7 - Install Plunger
6:07 Step 8 - Install Sensor & Flipper Button
7:09 Step 9 - Connect Wires
8:35 Step 10 - Install Monitor, Rails, ENJOY!
9:24 Final Thoughts/Outro

**********************
Follow PDubs on Facebook:
  / pdubsarcadeloft  

Follow PDubs on Twitter:
  / pdubsarcadeloft  

Follow Pdubs on Instagram:
  / pdubsarcadeloft  

*****************************
Thanks for watching - hope you enjoy the video and consider Subscribing!

#AtGames #Plunger #LegendsPinball #LegendsPinballMicro #HowTo #Tutorial #Add #Mod #Idaho3dPrinting