Power Carving a Human Skull in Pine

Thanks for stopping by, today I’m working on a skull in pinewood, particularly lodgepole species. Been wanting to do this forever making a human skull and this is first attempt in doing so. Project time was about 3 hrs. real time but I condensed it down to a little over 10 minutes.

It’s in time-lapse mostly with accompanying
narration. There are time stamps in the video
for easy navigation as well.
————————————————————
00:00 start
00:16 intro/rough out
00:57 using saburrtooth burrs
02:14 forney oval carbide burr
03:09 decisions
05:13 elongated flame saburrtooth
07:14 cartilage
09:30 sanding
11:54 wrap up
12:50 tools used




Wood-psyche is a power carving channel with tips and pro advice to take your carvings to the next level.

I create faces into Pine Knots & Cottonwood bark that I personally collect in the mountains and along rivers.

I’ve been actively carving over 10 years and
putting videos up on Youtube in the last 2 years and have about 80 carving videos online.

_____________________________

Tools Used For This Project:
~Tool Shop generic rotary tool
~Dremel Stylo +
Saburrtooth 1/8” burrs(3.2mm) shank
-spherical ( coarse)
~flame (coarse)
-elongated flame (coarse)
Dremel 1/8” (3.2mm) shank
-190/191 spherical
Forney carbide burrs 1/8” (3.2mm) shank
~oval large
~oval small
Generic Diamond Burrs
~ various shapes
Steel/Wire Wool - medium coarse
80/220 grit sandpaper

********
sounds:
newa.misaki
night ringtone alarm sound
https://freesound.org/s/647063/

newlocknew
UIAlert_Glassy Combine Mult Tone alert.Short
Signals_EM
https://freesound.org/s/647215/

#dremel #powercarving #skull

video shot & edited on iPhone 11
________________________________

——-:-:-:-:-:-:-:-:-:-:-:-;-;-:-:;-:-:-:-;-;-;-;-;-;-;-;-;/;-;/:;/;:/

Copyright © 2022 wood-psyche. All rights reserved.