Скачать или смотреть Old-style wire stripping machine wire stripping process

According to the specifications of the wire to be stripped (such as wire diameter, insulation thickness, etc.), the blade spacing and stripping length of the wire stripping machine are manually adjusted by knobs or screws; then the wire to be processed is inserted into the wire inlet of the wire stripping machine, and the position is adjusted to ensure that the cutter is aligned with the stripping part. After the machine is started, the cutter rotates or closes under the drive of the motor, cutting the insulation layer of the wire to the set depth, and then the insulation layer is pulled out through the clamping device or the wire is pushed forward to separate the insulation layer from the conductor. During the whole process, the operator needs to observe the stripping effect at any time and manually fine-tune the position of the blade or wire inlet to ensure that the stripping length is accurate and the conductor is not damaged. Due to the low degree of automation and slow stripping speed of the equipment, the efficiency is relatively low compared with modern fully automatic wire stripping machines, but it still has certain practicality in small batch and diversified wire processing.


Insurance: Every craftsman deserves comprehensive protection - buy accident insurance to provide solid support for your hard work, eliminate risks, and create every bit of value with peace of mind!
The above content is just a suggestion and does not promote any insurance company.