Bingham Projects Take-Down Recurve Bow Build Series - Part 5 - Limb Clean Up and Riser Prep

This is part 5 of a series on making a Bingham Projects Take-Down Recurve Bow. This video covers how I get the limbs cleaned up and how I built the riser with accent stripes by laminating 7 pieces of wood together. After lamination of the riser block, then I cut it to size and get the 21 degree angles cut using a DIY tapering jig.

FIGHTECH Dust Mask - https://amzn.to/3jKux3Z

The rest of the series can be found at the following links:

Part 1 - Overview -    • Bingham Projects Take-Down Recurve Bo...  
Part 2 - Building the Form -    • Bingham Projects Take-Down Recurve Bo...  
Part 3 - Building the Heat Box -    • Bingham Projects Take-Down Recurve Bo...  
Part 4 - Gluing up the Limbs -    • Bingham Projects Take-Down Recurve Bo...  
Part 5 - Limb Clean Up and Riser Prep -    • Bingham Projects Take-Down Recurve Bo...  
Part 6 - Hardware Install and Limb Tillering -    • Bingham Projects Take-Down Recurve Bo...  
Part 7 - Limb Tip Overlays -    • Bingham Projects Take-Down Recurve Bo...  
Part 8 - Shaping the Riser -    • Bingham Projects Take-Down Recurve Bo...  
Part 9 - Finishing the Bow -    • Bingham Projects Take-Down Recurve Bo...  
Part 10 - Final Thoughts -    • Bingham Projects Take-Down Recurve Bo...  

This video and description may contain affiliate links and as an Amazon Associate I earn from qualifying purchases which means that if you click on one of the products links, I'll receive a small commission.