Flash CoolPad Dazen 1 8297L-100 with Stock Firmware using YGDP tool ?

Coolpad 8297L-100 Update Done Firmware Download.
Coolpad 8297L-100 Firmware Flash File Download.
Coolpad 8297L-100 Firmware Stock Rom Download.
Coolpad 8297L-100 Firmware Official Flash File Donwload
Update Download Coolpad 8297L-100 Firmware Official Stock Rom.
Coolpad 8297L-100 Firmware Rom Download.


Requirement for CoolPad Dazen 1 8297L-100
1. CoolPad Dazen 1 8297L-100 phone with good battery charged, do not try with low battery.
2. CoolPad Dazen 1 8297L-100 Stock ROM Firmware Tested | Download here : https://docs.google.com/uc?id=0B4xgbP...
3. CoolPad Dazen 1 8297L-100 Flash tool | Download here : https://drive.google.com/open?id=0B3F...
CoolPad Dazen 1 8297L-100 USB Driver | Download here : http://www44.zippyshare.com/v/TF9PaFo...
4. Micro USB Cable with Good Quality
5. Computer or Laptop

Steps:
1. Fast download and Install Coolpad USB Driver.
2. Download and Install YGDP_Setup_V3.98_Customer (
3. Download Firmware File and extract at any location in your PC.
4. Restart your computer.
5. Open YPDP Tool and enter Password 369.
6. Click On Cnfig – Plese Select CPB File ( 4.4.150.00.T1.1500528.8297L-100.def.CPB )
7. After Select Firmware Download Click On ” Apply ”
8. Last Click On ” Start “

9. You can see YPDP Tool status "Download Mode".
10. Switch off your mobile phone.
11. Press and Holding Volume Up Key Then Insert The USB Cable
12. Press The Volume Up To Confirm and Volume Down Key To Cancel
13. Select "Confirm"
14. Your phone is now detected in PC and started Flashing with Stock firmware / downloading start automatically.
15. Wait until finished process, do not disconnect device while in flashing mode.
16. When flashing is 100% completed disconnect your mobile phone and reboot.

Congratulation you are done