DIY 1kW Sine Wave Inverter (12V-220V - EGS002)

Your one-stop PCB prototype Partner PCBWay: (https://www.pcbway.com/?from=TechBuilder)

A detailed tutorial on building a HIGH POWER 12v to 220v pure sine wave inverter board from scratch. The project is based on the low cost EGS002 SPWM driver board module. The DIY inverter board can handle more then 1kW, depending the transformer size that you are using. (mine is 500VA, only yielded 400W at the moment)

Detailed Written Tutorial:
https://www.instructables.com/DIY-Pur...
______________________________
PCB CONTENTS:

Order My PCB From PCBway:
Main Inverter Board (https://bit.ly/3mBFWTv)
Filter Breakout Board (https://bit.ly/31QBJU2)

Schematic, PCB & Documentation Files:
https://drive.google.com/file/d/1zbpp...
______________________________
PARTS REQUIRED:
EGS002 SPWM Inverter Driver Module
IRF3205 or IRLB4132 MOSFETS (16x)
12V UPS Transformer (500W/1000W)
(Transformer Ratio 7V:220)
TO-220 Isolation Set (16x)
TIP31C NPN Transistor
7805 Regulator
1N4007 Diode (8x)
10k Ohm NTC Thermistor
10k Ohm Multi-turn Trimmer
10 Ohm Resistor (4x)
2.2k Ohm Resistor
10k Ohm Resistor (4x)
100k Ohm Resistor (2x)
470nF 25v Capacitor
2.2uF +350v Capacitor
2.2uF 25v Capacitor
10uF 25v Capacitor
100uF 25v Capacitor

FOR HOMEBREW PCB:
Photopositive Presensitized PCB
Developing Solution (Sodium Hydroxide)
Etchant (Ferric Chloride)
Hacksaw
______________________________
STAY TUNED!
I could barely find a detailed tutorial on how to build one, so here's Part 1 of the five part EGS002 inverter design tutorial!

Part 1.) DIY 12v to 220v Pure Sine Inverter (1000W)
Part 2.) Learning How The EGS002 Works (SPWM Crash Course)
Part 3.) Designing Process of An EGS002 Inverter
Part 4.) Building A Smart 48VDC - 220VAC 5kW Inverter (Single Coil)
Part 5.) Designing & Building Inverter Transformers

#Electronics #Solar #Inverter