Mach 3 turn QCTP tool offset Setup

This is the Next video in the series as I progress through my Grizzly G0602 CNC lathe Conversion. Now that the conversion is complete
In this video I will Show you How I setup my QCTP Holders. Mach 3 Turn makes setting up the tool holders simple and easy Follow along as I setup a few different type cutting tools.
I apologize for the fan in the background it was very hot this day and I forgot to turn it off. My camera Mic. is very sensitive.

I will try to document and illustrate the process and hopefully put out information that others may have missed. Thanks for watching , Please subscribe, and feel free to comment,
Sam

In the next video I will continue to run some tests on the G0602 CNC
.
Disclaimer. I am not a professional. My videos are intended to
document my progress . I express no warranty as to the accuracy reliability or safety of the information provided here. By using any of the information provided in this video you acknowledge that I am not responsible or liable for injury or damage to property. Electricity is Dangerous proceed with caution follow all local regulations in your area. Visit the website at www.cnc4xr7.com