Скачать или смотреть Using ESP8266 NodeMCU to Drive an RGB LED module with an IR Remote

You find the components and program of this system in this link : https://www.robotique.site/tutorial/u...

The detailed objective of this tutorial is to build and program a system that controls the colors of an RGB LED using an infrared (IR) remote control, with the help of an ESP8266 NodeMCU board and an infrared receiver sensor KY-032.

Through this project, you will learn step-by-step how to:
discover how an IR remote sends coded signals as pulses of infrared light.
learn how the KY-032 sensor receives and decodes these signals to be interpreted by the ESP8266 NodeMCU.
connect the KY-032 sensor to the appropriate GPIO pins of the ESP8266.
understand the function of each pin (VCC, GND, OUT) and how digital signals are transmitted.
use the ir_rx library to read and decode signals sent from the remote control.
assign different IR codes to specific color outputs of the RGB LED (e.g., red, green, blue, or combinations).
light up the RGB LED in different colors based on the button pressed on the IR remote.
turn the LED on/off or change brightness and color dynamically.