EASY TO BALSA BEGINNER PLANE, Dwhobby新品木质上单翼练习机Vogee10新手航模测评

This model has a variety of configurations to choose from, including empty machine, empty machine with power pack, and PNP version. I personally recommend novices to choose the PNP configuration. All electronic equipment and spare parts are basically installed, and the hands-on installation workload is small and basic. It can be done within an hour. Mine is an empty version with power installed, and the installed capacity is relatively large. The installation time is about 3 hours.
It has a traditional wooden training machine structure, with a dihedral upper monoplane. The wings and fuselage have a simple structure. The lower surface is made of transparent blue skin. The internal structure can be seen at a glance. Even if there are small bumps, everyone will repair them. The difficulty is lower. The installation position of the motor is not very reasonable. The motor is located behind the firewall, so it is difficult to adjust the tension line through the gasket. Fortunately, the angle deviation of the firewall is not large, and it is still very easy to fly after leveling with medium throttle.
Its flight performance is definitely its most outstanding feature. It has a large wingspan, is light in weight, and has sufficient power. It can easily perform hovering at medium and low throttle, climb at large angles, and perform basic aerobatic maneuvers. Although the design of the last three points is not friendly to beginners when sliding on the ground, compared with the first three points, the damage to the structure caused by a heavy drop will be much lower.
In general, this is a wooden training aircraft with stable flight performance, simple structure and easy repair. It is very suitable for novice model friends with a little basic knowledge to experience the installation, debugging and flying fun of wooden aircraft.
Brand: ‪@rosedwhobby2005‬ DWhobby
Model: Vogee10
Wingspan: 1070mm
Takeoff weight: 780g
Power: 2212 motor, 30A ESC
Equipment used by Haozi:
‪@FrSkyRClive‬ X14S remote control, Gens 3S 2200mAh battery

15-25级的小型木质练习机绝对是一代人的记忆，它好飞好带，结构简单方便修复，是许多模友的入门机型。这次DWhobby再次设计了一款翼展1米的小型木质练习机，那么它到底怎么样呢？
这款机型有多种配置可选，空机、空机加电装，以及PNP版本，个人比较推荐新手选择PNP配置，所有电子设备和零配件以及基本安装完毕，到手装机工作量小，基本一小时内就能完成。我的是空机加电装的版本，装机量就比较大了，大约装机时间3小时。
它是传统的木质练习机结构，带有上反角的上单翼，机翼和机身结构简单，下表面为透明蓝色蒙皮，内部结构一览无余，即使出现小磕小碰，大家修复的难度较低。电机的安装位置设计不太合理，电机位于防火墙后，很难通过垫片调整拉力线，但好在防火墙的角度偏差不大，中油门调平后还是非常好飞的。
飞行性能上绝对是它最为出众的特点，它翼展大，重量轻，动力足，轻松可以进行中低油门的盘旋、大角度爬升和基本的特技动作。后三点的设计虽然对新手的地面滑跑不算友好，但是相比前三点，重降对结构的损伤会低很多。
总的来说这是一架飞行性能稳定，结构简单易修复的木质练习机，很适合有点基础的新手模友入手，体验木质飞机的装机、调试和飞行的乐趣。
品牌：DWhobby
机型：Vogee10
翼展：1070mm
起飞重量：780g
动力：2212电机，30A电调
昊子使用的设备：
睿思凯X14S遥控器，格氏新航电3S 2200mAh电池