[OpenFoam Tutorial 5] Turbulent Flow in a Pipe with Salome as Mesher

Let's Talk about Openfoam, Salome and Turbulent Flow Simulation :)

In this 5th tutorial, we will look into how to build an OpenFoam model from scratch by using Salome to do the CAD processing and the Meshing!

Download the CAD here:
https://www.mediafire.com/file/6kgn24...

I'll also give you some useful bits of knowledge about turbulence modeling in CFD analysis, so I hope this will be useful!

What you will learn in this video:
00:00:00 Introduction
00:03:08 Preparation of the Geometry in Salome
00:13:30 Meshing of the inner Volume in Salome Smesh
00:19:35 Preparing the OpenFoam Case Study
00:20:56 Choosing the OpenFoam Solver
00:23:26 Choosing the turbulence Model
00:29:23 Converting the Mesh to OpenFoam
00:34:40 Setting up all the OpenFoam Boundary Conditions and settings
00:50:44 Setting up the residuals monitoring
00:57:51 Solving the case
00:59:40 Checking the convergence of the residuals
01:00:50 Post-processing of the results with ParaFoam (Paraview)

If this video was helpful, please leave a like and subscribe to my channel, thank you!!

What is Openfoam?

Openfoam is currently the leading free and open-source solver for Computational Fluid Dynamics (CFD).
It belongs to the Openfoam foundation and it is distributed under a GPL License. This GPL License gives you the freedom to redistribute the software and it garanties that the usage will remain free.

Check my blog and other Open-Source Simulation Tutorials:
http://feaforall.com/