How to Replace Front Right CV Axle Assembly 2013-2020 Ford Fusion 2.0L L4

Buy Now!
New CV Axle Assembly from 1AAuto.com https://trq.video/ib-1AACV01236

This video shows you how to install a new CV axle assembly in your 2013-2020 Ford Fusion 2.0L L4. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

Estimated installation time for a professional technician is approximately: 1 hour 6 minutes

This repair was done on a 2016 Ford Fusion SE 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Fusion
2014 Ford Fusion
2015 Ford Fusion
2016 Ford Fusion
2017 Ford Fusion
2018 Ford Fusion
2019 Ford Fusion
2020 Ford Fusion

Tools you will need:
• Pry Bar https://trq.video/oakL-1AXAA00020
• 10mm Socket https://trq.video/ob85-1AXAA00017
• 13mm Socket https://trq.video/ocDE-1AXAA00015
• 18mm Socket
• 19mm Socket
• 24mm Socket
• 32mm Socket https://trq.video/ofi-1AAST00003
• Brake Caliper Hanger https://trq.video/opU-1AXAA00439
• Trim Tool Set https://trq.video/oaPn-1AXXX00006
• 1/2 Inch Impact Gun https://trq.video/oCQ-1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet https://trq.video/ocDU-1AXAA00016
• Torque Wrench https://trq.video/obER-1AXAA00044
• Cloth Rags https://trq.video/o3P-1AXSS00035
• Liquid Thread Locker
• Petroleum Jelly
• Rust Penetrant
• Floor Jack https://trq.video/oaW9-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oaIJ-1AXAA00065
• Punch
• Rubber Mallet
• Wheel Chocks
• Wire Brush https://trq.video/oCU-1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.