Resealing Deck Hatches + Gaskets

** NOTE ** This is NOT a 'How-To' video, but a 'How I Didi It', as I am just showing the procedure and techniques UI used both there with this boat, as well as our two prior Sea Ray's. If you have a system you prefer, have at it!

After having owned two previous Sea Ray boats of the late 1990's vintage, I knew it was just a matter of time before the deck hatches would leak (one already was when we bought the boat), so I decided to pull all four on our 1998 370 Sundancer to repair them before she was even launched.

Beyond replacing the factory frame to deck seal with a good bead of SikaFlex 291, I also replaced the foam rubber gasket with a new one, using the OEM 'Taylor Made Hatch Gasket' part #1725. And before anyone starts yelling at me that I should have used a 3M sealer, that is also an option (along with others), but I have been using SikaFlex for numerous repairs on our past boats with great success, so I have no reason to change.

To follow along with the entire journey, please check out my 'Buying A Boat - The Good, Bad & Ugly' playlist here:    • Buying A Boat - Sea Ray Sundancer - T...  

Filmed May, 2022.

-------------------------------------*****------------------------------------
*** Like this video and wish to support the channel? You can make a one time or recurring PayPal donation here: https://www.paypal.com/donate?hosted_...
Or, you can choose to support us by becoming as Patreon Member, for exclusive or preview content before it reaches YouTube. Check it out here;   / boatingwithboogaboo  
-------------------------------------*****------------------------------------

Please remember to SUBSCRIBE to my Channel (   / boatingwithboogaboo  ) for hundreds of original boating videos and to follow our latest boating adventures.
+++ Join the husband and wife cruising & traveling couple - the 'Boogaboo Crew' - as we set sail to fun & adventure! Watch Hundreds of original Boating & Travel videos, join us on Facebook, Instagram and much more, all at https://BoatingWithBoogaboo.com.
- - - - - - - - - - - - - - - - - - - - - - - - - - - -

For a look at nearly 100 DIY boat repairs videos, check out my 'How I Did It - Boat Repairs and Upgrades' playlist;    • How I Did It - Boat Repairs & Upgrades  

Boat Specs;
- Model: 1998 Sea Ray 370 Sundancer
- Length (bow to transom): 37-6", LOA (with factory swim platform): 40'-1"
- Beam: 12'-7"
- Dry Weight: 17,000 lbs
- Fuel Capacity: 275 U.S. gallons, 1,040 litres
- Draft: 32”
- Dead Rise: 20 degrees
- Engines: 2 x 7.4 litre Mercruiser Bluewater, Multi-Port fuel injection, gasoline,
raw water cooled, rated at 310 HP
- Transmissions: 2 x Borg Warner Velvet Drives, in Vee-Drive configuration
- Generator: Westerbeke 7.2 Kw BCGTC @ 60 Hz, gasoline powered & carburated, 3,600 RPM continuous engine speed
- 18,000 (total) BTU (12 + 8), reverse cycle heating/air conditioning
- Shore Power: 2 x 30 Amp, 120 V connections
- Freshwater Holding Tank: Single 70 U.S. Gallon tank
- Waste (black-water) Holding Tank: Single 40 U.S. Gallon

Video/Photo Equipment Used (Updated list, 2022)

- DJI Pocket 2 (For more info on that compact, 4K camera + help support the channel, please click here; https://click.dji.com/AEYMHJ8ly85PeHp...)
- GoPro Hero 7 Black, on GoPro suction cup mount
- Google Pixel 6 Pro + iPhone 12 for still photos + supplemental video
- DJI Mavic Mini for Aerial Drone Shots ( For more info on that great, compact drone + help support the channel, please click here: https://click.dji.com/AAnzdtD07BPE4at...)
- Editing done with Vegas Movie Studio 11