Скачать или смотреть Lash and Brow Tinting Tutorial

Tutorial video for Instant Eyebrow Tint. Link Below:
https://godefroybeauty.com/products/i...

For Eyebrows:
PREPARING THE BROWS
For best results, wash eyebrows with a mild soap and water, or use an oil free makeup remover. Let dry before tinting.
To protect the skin from accidental staining, apply a thin coat of petroleum jelly around the eyebrow. Be careful not to get any on the eyebrows, this could inhibit the coloring process.
APPLICATION
Remove work station card and squeeze entire contents of Solution No 1 and No 2 onto the marked circles. DO NOT MIX.
It is best to tint one eyebrow at a time, allowing the color to process completely before starting the second eyebrow. Using enclosed applicator stick, apply solution No 1 onto the eyebrow. Let stand for 2 minutes. Gently blot dry with a tissue before proceeding to the next step.
Wipe applicator stick clean and apply Solution No 2 directly to the eyebrow. Let stand one minute and wipe clean with a damp tissue or cotton ball. Remove any color that may have gotten onto the skin with a damp tissue.
Helpful hint. For slightly darker, longer lasting results, reapply remaining mixture and repeat the process.

For Eyelashes:
TINTING YOUR EYELASHES
For best results, wash lashes thoroughly with a mild soap and warm water, or use an oil free makeup remover. Let dry before tinting.

It is best to tint one eye at a time. Apply a thin coat of petroleum jelly under the eye area and apply enclosed eye shields. Make sure eye shields are placed directly below the lower eyelashes. This will prevent staining
If using single application packets, remove the work station card and squeeze the entire contents of solution No 1 and No 2 onto the marked circles. DO NOT MIX. If using multi application tubes, remove cap of solution No 1 Cream Colorant and pierce the protective film on front end of the tube
Apply solution No 1 onto the lashes with enclosed applicator in a downward motion towards the eye shield. Let stand a few seconds. Do not remove color
Wipe applicator stick clean and apply solution No 2 over solution No 1. Be sure to coat each eyelash hair thoroughly including ends and corners of the eyelashes. Let stand one minute
Remove color with a damp tissue by wiping downward towards the eye shield. Wash lashes with water to remove any residue. The tinting process is now complete
TINTING YOUR EYEBROWS
Apply petroleum jelly around the eye area to prevent accidental staining. Be careful not to get any on the eyebrows.
Follow directions 2-5 for tinting the eyelashes. They are the same
STAINING THE SKIN HAS OCCURRED
. Stains will disappear in 1-2 days. To speed up the process, create a mild exfoliate of water and sugar, and rub gently on stain and rinse with water
Apply a matte makeup or powder to cover stain.
A SLIGHT STINGING SENSATION AFTER APPLYING HAS OCCURRED
A slight stinging sensation is somewhat common and should subside quickly after rinsing with water. If stinging persists, discontinue use and seek medical attention.

-----------------------------------------------------------------------------------------------------------------------
Shop on our website now @ https://godefroybeauty.com/products/i...

Follow Us:
Website: http://www.godefroybeauty.com/
Instagram:   / godefroybeauty  
Twitter:   / godefroy_beauty  
Facebook:   / godefroybeauty  

For any questions or concerns please call us at:
(800) 854-9809
Or email:
support@godefroybeauty.com