2011 Audi S5 Windshield Wiper Alignment

Performing a wiper alignment on an 2011 Audi S5. Sometimes, when a new windshield is installed the wipers may not be re-installed in the correct position requiring you to perform a re-alignment.

Tools used:
Wiper Arm Puller Tool (8mm Hex bit)
Tape Measure
Torque Wrench
13mm socket
Ratchet and extension
Pry tool

Torque spec:
Windshield Wiper Arm Nut - 12.54 ft-lb (17 Nm)

Audi part numbers:
Windshield Wiper Arm Nut Cap - 5N0 955 205 9B9

00:00 - Intro
00:19 - Before
01:03 - Tools
01:56 - Putting wipers into maintenance position
02:57 - Opening hood and removing wiper cap
03:42 - Removing wiper arm nut
04:00 - Wiper Arm Puller Tool
04:57 - Pulling the wiper
06:03 - Closing hood and putting wipers into parked position
06:39 - Opening hood again
06:55 - Reviewing the Audi adjustment procedure
08:13 - Installing and adjusting the wiper
10:22 - Windshield wiper tightening
10:49 - Installing wiper caps
11:24 - Closing hood and placing wiper into parked position
12:22 - Before and after comparison
12:59 - Outro