Honda VFR800 VTEC - Rear Hub, Strip & Assembly - Wheel & Sprocket Bearing Replacement

Hello everyone and welcome back to the channel.

In this video I will be stripping the rear hub assembly from the bike and replacing all of the bearings and seals inside.

These hubs if neglected can and will seize into the swingarm making the simple task of chain adjustment incredibly difficult and invariably involves a strip of the hub anyway!

The parts that I used in my video are all genuine Honda items which I will link below, however nearly all of these bearings can be found for a much lower price at any bearing supplier.

The parts needed will be Item numbers 24, 30, 31, 32, 33, 34 (X2) and lastly number 35 all in the diagram at the link below.

https://www.fowlersparts.co.uk/parts/...

If you are interested in getting yourself a 6 tonne press just like mine then the link to that is below.

https://ebay.us/vhXI3p

The bearing driver set that I also used is listed below. These are perfect for fitting oil seals as they assist in fitting them perfectly flat without any damage.

https://ebay.us/G3ozrk

All links to products are affiliate links for which I will receive a small commission on any purchase made, at no additional cost to you.

Anyway guys and girls, I hope that you enjoy this video and I will see you all in the next one!

If you wish to offer support to my channel and enable me to continue to bring you quality content then please check out my Patreon page at the following link - https://www.patreon.com/user?u=67741595 - Thank you.

Join me on the socials at the following links

Kevs Shed on Facebook -   / 561477094498994  
Kevs Shed on Instagram -   / kevins_shed  
Kevs Shed on Twitter -   / catakev79