Скачать или смотреть I3 9th GEN PC BULD |NEXTON COMPUTERS

Hey everyone, welcome back to the channel. Today we’re building a budget gaming / all-purpose PC using a 9th-generation Intel Core i3.

This build is for those who want good performance without spending big.

In this build we’ll walk through part selection, compatibility, assembly, BIOS/setup, and show you how it performs.”
🛠 Step-by-step Build Sequence

1. Unbox all components; check for any physical damage.


2. Install CPU onto motherboard: align the notch, gently seat, lock the lever. (Refer to motherboard manual.)


3. Install CPU cooler (apply thermal paste if not pre-applied) and attach fan.


4. Install RAM into the correct DIMM slots (usually slot A2 & B2 for dual channel) and SSD (M.2 or SATA) on board.


5. Install motherboard into case (standoffs, screws) and route cables.


6. Connect power supply: 24-pin ATX main, 8-pin CPU power, GPU power (if needed).


7. Install graphics card into PCIe x16 slot.


8. Double-check all connections: power, data, case front panel.


9. Power on, enter BIOS: check that CPU and memory are recognised, set boot drive, ensure correct temperature/voltages.


10. Install operating system (e.g., Windows or Linux) and drivers.