Building a servo winch and demonstrating control options for it.

Not a particularly quick run through on how to make a servo winch and what the control options are, but hopefully its informative enough to enable you to make your own choices at the time of filming (Nov2019). The control options shown are:
TFL Servo Winch from Banggood 
https://www.banggood.com/TFL-C1616-08...

HeyOK Servo Winch Controller with Soft Start https://www.freewebstore.org/heyok-pe...

HobbyWing 1060 ESC (or equivalent) 
https://www.modelsport.co.uk/hobbywin...

RC4WD Winch Controller (wired) 
https://rcbitz.com/warn-rc4wd-wired-w...

Apologies, I had quoted the cost of the RC4WD at £40 during the filming when it turns out to be £35 and thus similar to the HeyOK option. The Hobbywing 1060 is less than £20 and the TFL controller under a tenner. The HeyOK is built specifically as a winch controller, offers a soft start option and will package inside the servo making it my favoured choice, however any of the other 3 will also work - I just have a small concern over the RC4WD option as it wasn't designed for this particular application - use it for driving a servo at your own risk!
Conversion of the servo starts at 2:00
Discussion of the control option starts at 6:46
Demonstration of the controls options starts at 10:58
Lifting the truck off the table starts at 21:45