AWESOME 3D Printed Servo Robot Gripper!

3D Printed Servo Robot Gripper using MG90S Servo Motor

This is a 3D Printed Servo Gripper made using 3d printed parts and a MG90S Metal Gear Servo Motor. This gripper can pick objects and can be attached on a robotic arm for picking up objects. i have used a servo tester to test the movement of the gripper.

UPDATE: CAD Files Link: https://cults3d.com/en/3d-model/gadge...

i designed the gripper in fusion 360. i will soon be uploading the files on thingiverse. i have used M3 nuts and bolts. the nuts are 15mm in length and 3mm diameter. i have used standard M3 nuts. but it is preferred to use Nyloc lock nuts as the bolts can unscrew with continuous operation. i powered the servo tester with my DIY portable power supply. i have listed all the parts links below.

Let me know your suggestions and opinion on the build

Parts:

MG90S Servo Motor: http://bit.ly/3jgcdyV

Servo Tester: http://bit.ly/3cCDx9f


Solder Iron i Use: http://bit.ly/2GSArih

Helping Hand Magnifier: http://bit.ly/2Uh11oe

arduino uno Micro USB: http://bit.ly/aRdUiNo


also do check out these cool 3d Printers:

Creality Ender 3 pro : http://bit.ly/36m1POI
Creality CR-10s pro: http://bit.ly/2QmqU6z
#3DPrinted #Robot