Скачать или смотреть Walking Beam Employed to End Form and Bend a Tube-- Winton Machine Company

http://www.WintonMachine.com

A high speed transfer machine designed and built by Winton Machine to end form and bend a tube. The system loads a tube from a mangazine, end forms, bends, and then ejects the tube.

The Process
The 4 station transfer machine shown drops 1 part every 6 seconds. It doesn't matter if there are 1 or 2 bends, the part production time is 6 seconds. The transfer machine shown is setup to flare both ends and then put 2 bends in the part. The benefits of this setup include minimal process time, significant reduced labor costs, and consistent fabricated parts.

Retooling
The machine can be quickly retooled to bead 1 end, swage the other, and make only 1 bend. Numerous modular configurations are available.

To find out more, visit:
http://www.wintonmachine.com/transfer...