INDAG Solid-Liquid Inline Mixer Food Fest-Flüssig Inline Mischer Lebensmittel Hygiene, Typ DLM/FS

The INDAG solid-liquid mixer type DLM/FS is used for the continuous mixing of liquids with solid components. The solid components can have sizes up to 20 mm (spherical diameter) or be powdery. Usually, the liquid portion is the larger amount by weight. Depending on the geometry of the mixing elements, the solids can be mixed in gently or with a higher shear rate. This ensures that powders are finely distributed, and larger solid particles are not damaged during mixing. It is also possible to mix solids into foams without damaging the foam material. A few examples from a wide range of applications are: Mixing of chocolate + nuts; fruit jelly + crispies; sugar mass + citric acid powder; whipping cream + chocolate chips; cream cheese + herbs; caramel + protein powder; nougat + chocolate bark, and mixing cocoa powder + cocoa butter.

The INDAG solid-liquid mixer type DLM/FS consists of a feeding zone and a mixing zone. The liquid and solids are fed into the feeding zone, from where they are transferred to the mixing zone by means of a screw conveyor. The mixing zone contains mixing elements in the rotor as well as the stator. Thanks to the special arrangement of mixing elements and feeding zone, the ingress of gases into the product is limited to a minimum. At the discharge end, the mixed product is fed virtually pressure free to the next processing stage. The mixed product either enters a buffer vessel or is fed to a pump. Both stator and rotor are available as heated versions (double-walled). The DLM/FS is perfectly suited for CIP cleaning. For machines with frequent manual cleaning cycles, and because of the easier maintenance, we recommend a machine frame with the mixer housing mounted on the “Easy clean” carriage. Optionally, every mixer can be fitted with a double acting mechanical seal or a stuffing box seal. The DLM/FS comes in various sizes. We offer rental machines for tests on the customer’s site or at INDAG.

Imprint
INDAG Maschinenbau GmbH
Ivenfleth 13
25376 Borsfleth
Germany
Phone: +49 4124 9876 - 0
Fax: +49 4124 9876 - 54
E-mail: [email protected]
Managing Director Mr. Wilko Willuhn
Commercial register: Amtsgericht Pinneberg HRB 301 IZ
VAT number: DE134776706

Privacy Policy:
https://indag.de/en/data-protection-d...