etrailer | Detailed Breakdown of the Fulton Boat Trailer Jack w/ Wheel

Click for more info and reviews of this Fulton Trailer Jack:
https://www.etrailer.com/Trailer-Jack...
Check out some similar Trailer Jack options:
https://www.etrailer.com/dept-pg-Trai...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Fult...
Today were going to take a quick look at the Fulton Bolt-Through swivel marine jack part #: FXP10. This jack is designed to bolt onto the frame of your trailer using these mounting brackets and bolts included with the jack. It has a 6 inch diameter wheel on the bottom to help maneuvering the trailer around. It has a bracket height of 12 inches, thats from the bottom of the wheel to the center line of our mounting bracket. I have another one of these jacks here thats already fully extended. Again, bracket height is from the bottom of the wheel to the center of the mounting hardware and this one measures 23 inches when fully extended.

The difference between the two, 10 inches, is also the lift height. The jack is finished in the Z-Max 600 zinc finish. The zinc finish helps protect the jack from corrosion which makes it a good application for marine use. The jacks made in the USA and its covered by a limited five year warranty. It also has a 1,200lbs lift capacity and its made from 2 inch diameter tubing.

It has a height clearance of 10 inches from the top of the jack to the center line of our mounting hardware. And thats it for our quick look at the Fulton Bolt-Through swivel marine jack part #: FXP10.