How to program CAM for flat guitar necks in Fusion 360 | Complete Tutorial

In this video we dive deep into CAM for flat guitar necks in Autodesk Fusion 360. We program the CAM for the neck on my guitar, from start to finish, including Setups, Stocks, Fixtures, 2D & 3D Toolpaths, and full simulations with detailed tips and tricks.

Chapters:
0:00 Introduction
1:24 Constraints / Order of Operations
4:20 Fixture Details
7:01 Setup for Front Side Operations
9:18 2D Pocket for Spoke Truss Rod Slots
20:14 2D Contour for Front Side Profile
23:04 3D Adaptive Clearing for Front Headstock Cutaway

27:52 3D Parallel Finishing Using Flat Endmill Trick.
33:20 2D Boring for 10mm Tuner Holes
34:29 Simulating All Front Side Operations
36:05 Flipping Part & Setup for Back Side Operations
37:26 2D Contour for Back Side Headstock Profile

43:01 3D Adaptive Clearing for Back Side Headstock Cutaway
45:24 3D Parallel Finishing Using Flat Endmill Trick Again
46:49 2D Contour For Neck & Heel
52:14 3D Adaptive Clearing for Neck & Heel
59:22 2D Facing for heel Surface

1:02:45 3D Parallel for Neck Surfaces
1:09:49 Final Simulation of All Toolpaths
1:14:56 Final Thoughts

Fusion 360 Tutorial | CAM Basics (Part 1)
   • Fusion 360 Tutorial | CAM Basics  

Fusion 360 Tutorial | CAM Order of Operations (Part 2)
   • Fusion 360 Tutorial | CAM Order of Op...  

How to program CAM for guitar bodies in Fusion 360 | Complete Tutorial
   • How to program CAM for guitar bodies ...  

How I modeled this guitar:
   • Guitars in Fusion 360  

Support me on Patreon:
  / austinshaner  

Discord Server: Come chat with us!
  / discord  

If you like this video or want to learn more in Fusion 360, please like, comment, and subscribe to not miss any future videos!

#Fusion360 #CNC #CAM