NEW TEPPER MRL Freight Lift with LiSA 20 Controller in NRW, Germany

Timestamps:
0:00 intro
0:25 normal ride
2:03 motor room
4:51 car top / lift shaft

This lift is situated in an old office building in a City in NRW, Germany. It was installed in 2022 and it replaces an older freight lift. The lift was installed by Tepper and is constructed as an MRL lift with the control cabinet located in the former motor room. The lift runs on a LiSA 20 controller with a B+F drive. The levelling is fully intelligent using the DCP 4 protocol. Advanced door opening and fast start are enabling, making this lift very efficient. The half-floor H opens directly to the street level and is located between the ground floor E and the basement K.

Manufacturer: Tepper, 2022
Capacity: 33 persons / 2525 kg
Type: Traction, 2:1 roping
Floors: 8: K, H, E, 1-5
Fixtures: BS Tableau D28
Speed: 1 m/s
Travel height: 22m
Logic: Schneider LiSA 20
Drive: Brunner+Fecher FB-20
Motor: Ziehl-Abegg ZAtop SM250, 16 kW

WARNING/DISCLAIMER: DO NOT attempt to copy anything shown in the video without having the proper knowledge of how to do so! LIFT SHAFTS and MACHINE ROOMS are very DANGEROUS places and are NOT MEANT to be accessed by inexperienced or untrained personnel!
Dangers in these environments include but are not limited to crushing, electrocution, falling and burns.

Recording: Q2 / 2023