Creality Cr10S ultimate Heat-bed upgrade! 750W heater installed

This is step by step tutorial that will make your CR10 or CR10S heated bed to warm up insanely fast and reach temperatures that was not possible before. With this 750W AC powered silicon heater printing ABS and other materials that require 110C+ degrades on heated bed is not a problem any more. Parts list are down in description.
-------------------------------------DISCLAIMER------------------------------------------------
Am not taking any responsibility if you are unskilled and inexperienced with electricity! AC voltage can be dangerous!
Use this video as reference or idea how this update can be done and what results it can deliver.
If you don't know what you are doing, found electrician to do this job for you.
If you have better way to do this update then please do it in your way.
If you want extra safety add ground wire to the bed and connect it to the ground on the power-supply ground terminal or on ground pin on the main AC plug switch.
Also for even more extra safety install Anycubic Ultrabase and don't use paper clamps and turn off printer when you removing the glass.
Thank you.

If you have Creality CR-10 or CR-10S use these parts from the list:
CR10/S 750W Silicon Heater - https://s.click.aliexpress.com/e/_DF7...
300x300 Insulation Cottons - https://s.click.aliexpress.com/e/_DEU...
Solid state relay 25A - https://s.click.aliexpress.com/e/_A2NFhg
ULTRABASE glass surface for CR10/S - https://s.click.aliexpress.com/e/_Dlm...
Isolate your wires with Heat shrink wrap - https://s.click.aliexpress.com/e/_De5...

If you have CR-10 S4 (400x400mm) use these parts:
400x400 Silicon Heater (1000W) - https://s.click.aliexpress.com/e/_DBg...
Solid state Relay - https://s.click.aliexpress.com/e/_A2NFhg
400x400 insulation cottons - https://s.click.aliexpress.com/e/_DF3...
Isolate your wires with Heat shrink wrap - https://s.click.aliexpress.com/e/_De5...

Popular Online retailers:
Amazon.com - https://amzn.to/3k08g0K
Amazon.ca - https://amzn.to/3c3efiJ
Amazon.de - https://amzn.to/3rnvj9l
Amazon.co.uk - https://amzn.to/3blB2qY
Amazon.se - https://amzn.to/3bhU55l
Aliexpress - https://bit.ly/2GWF50w
Banggood - https://bit.ly/2T0R8fG
Ebay - https://ebay.us/OJuoTs

Cheap filament for 3D printer:
PLA filament for 3D printer
On Amazon - https://amzn.to/2K6U99U
On Banggood - http://bit.ly/2pZSiwK

PETG filament for 3D printer
On Amazon - https://amzn.to/36RHEsz
on Aliexpress - https://goo.gl/8Cfsrb

ABS Filament for 3D printer
On Amazon - https://amzn.to/2K5S4LH
On Banggood - http://bit.ly/2CurLuc

3D printer parts and accessories:
CR10/S Nozzle different size: https://goo.gl/5QpRV7
3D printing surface:
Sticker: https://goo.gl/WTmmiM
BueTape: https://goo.gl/7vQMYp
Switch for PSU - https://goo.gl/sKzzkg
Rubber Timing Belt - https://goo.gl/3xtQPv
SCS8UU-8mm-Linear-Ball-Bearing - https://goo.gl/88pgGV

Gear that I use for my videos:
http://www.nexi-tech.com/gear-that-i-...

You like what I do? Support me on Patreon
  / nexi_tech  

I put a lot of effort and time in my videos and I would appreciate if you click on the ''Like'' and ''subscribe'' button.
Thank you so much for your support.
Best Regards!
Nexi