Скачать или смотреть Push-In Terminal Block Assembly Machine

Push-In Terminal Block Assembly Machine;
The machine performs fully automatic assembly and post-assembly quality control of TBLOC PFT 2.5 push-in terminal blocks.
A total of 7 parts, including plastic body, plastic cover, current busbar, two springs and two cable release pins are assembled within +/- 0,03mm tolerance.
After assembly, torque over both spring clamps are checked via loadcell.
In order to detect deformations over the plastic body originated from plastic injection process, high voltage is applied according to the IEC 60079-7 standard and a short circuit test is performed.
Shall there be any defect in terms of spring clamp performance and/or plastic body short circuit test, the product gets rejected from the machine.
The production rate of the machine is 35 pieces/minute

www.sakenmechatronics.com.tr
www.tbloc.com.tr