How to Install Two Horns On Single Horn Setup

To install two horns on a single horn setup, you can follow these steps:

1. *Gather Your Materials:*
- Two horn units
- Mounting brackets
- Appropriate wiring
- A relay (if not included with the horn kit)
- Appropriate tools (screwdriver, wrench, wire stripper, crimping tool, etc.)

2. *Choose a Suitable Location:*
Select a location for both horns on your vehicle. Ensure they are mounted securely and will not obstruct any other components or moving parts.

3. *Mount the Horns:*
Attach the mounting brackets to each horn and then secure them to your chosen location on the vehicle. Make sure they are tightly fastened.

4. *Wire the Horns:*
a. Connect the positive terminal of one horn to the positive terminal of the other horn using a short piece of wire.
b. Connect the negative terminal of one horn to the vehicle's chassis or ground using a wire.
c. Connect the positive terminal of one horn to the relay's switch terminal.
d. Connect the relay's coil terminal to a 12V power source (typically from the vehicle's battery).
e. Connect the relay's ground terminal to the vehicle's chassis or ground.
f. Connect the relay's common terminal to the positive terminal of the other horn.
g. Connect the relay's NO (normally open) terminal to a switch in your vehicle's cabin (e.g., a dashboard switch).

5. *Test the Setup:*
Turn on the switch you connected in step 4g and test the horns to ensure they are working as expected.

6. *Secure Wiring:*
Ensure all wiring is properly secured, away from moving parts, and protected from the elements.

7. *Double-Check Connections:*
Before finalizing the installation, double-check all connections to make sure they are secure and correctly wired.

8. *Close Up:*
Reassemble any parts of the vehicle you had to remove to access the installation area.

#horn #hornsinstallation #skills