Ford Fusion - OIL CHANGE REQUIRED MESSAGE RESET / CLEAR (2010 - 2012)

Short video on how to delete / reset oil change indicator message and set the oil life to 100% on Ford Fusion ( 2010 | 2011 | 2012 | SE | SEL | LIMITED | AWD).

Oil change light should be reset after every fresh oil change and then you will get notified when the next oil change is due.

To reset the oil message you will be using menu buttons on the left side of the steering wheel (SETUP and RESET). Keep pressing Setup until you reach oil life sub- menu and then press and hold Reset to set the oil life to 100%. Very easy to do. Watch the video to see exactly how to do it.

Thanks for visiting my channel.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.