How to repair your DJI Avata 2 | Motor and Under Frame Replacement | Disassembly | Teardown

Welcome to this repair video, where I'll be replacing the motors and underframe of a DJI Avata 2 FPV drone.

The drone had a broken underframe and both front motors were stuck and barely turning.
It also had an ESC error due to the stuck motors..

The previous owner soaked the whole underframe in glue and some of the parts were practically fused together.
I actually had to cut/grind parts off the underframe in order to get it off.

Due to a lack of parts, some of the visual damages could not be repaired, but the functionality was fully restored.

More parts are becoming available daily, so you can check here:
https://a.aliexpress.com/_EQnAzH7

#dji #repair #avata2 #dronerepair #fpvdrone #fpvrepair #djiavata2 #fix

Chapters:
00:00 - Intro
00:40 - Under frame
02:50 - Mainboard & camera removal
04:25 - ESC Board and motors removal
05:10 - GPS Board removal
05:55 - Rant
07:20 - Soldering new motors
08:20 - ESC Board and Motors Reassembly
10:20 - GPS board reassembly
11:20 - Mainboard and Camera Reassembly
12:28 - Pre-assembly function test and full reassembly
15:10 - Final testing
16:00 - Flight test

DISCLAIMER

This video is provided for general informational purposes only. We do not assume any responsibility for any damage or injury that may occur as a result of following this guide. Any reliance on the information provided is strictly at your own risk.