Triple arches

This video walks you through how I assembled my triple arches using 3D printed bases. The materials I used are listed below along with links.

Arch bases- 3D file- https://sfl-designs.com/?store-page=S...

Arch bases- pre-printed ready for use- https://sfl-designs.com/?store-page=S...

Pixel Strips from Your Pixel Store, select the size you need: https://yourpixelstore.com/product/ws...

1 inch PEX pipe: https://www.homedepot.com/p/Apollo-1-...

The remaining items can be picked up from your local hardware store, they are:

M4x 50 mm screws along with the nuts
Acetone if you want to remove the writing from the PEX. This can be found in the painting department.
~200 #6 screws that are ½ or ¾ of an inch long.
5 feet of ½ inch EMT for each arch
½ ich PVC pipe

Let me know if you have any questions.