iTouch Sure Pelvic Floor Exerciser - Setup Guide | TensCare

iTouch Sure Pelvic Floor Exerciser - Device Setup Instructions | TensCare

Learn more: https://www.tenscare.co.uk/continence...

Preparing your exerciser for use is very simple. Follow along with these device setup instructions and your iTouch Sure Pelvic Floor Exerciser will be ready for use.

First, make sure you have batteries inserted into the control unit. The instruction manual contains a handy guide which will show you how to do this.

To switch the unit on, simply press the "on" button on the front of the unit for 3 seconds. The screen should light up and you should hear a little "beep" noise. To switch the unit off, simply press the "off" button on the front of the unit.

Next, we need to connect the exerciser to the control unit. To do this, the first thing you'll need to do is unravel the lead wire. You'll notice that at one end of the wire, there are 2 separate plugs with metal prongs sticking out. Insert the 2 metal prongs into the cylindrical pockets at the end of the wire which extend from the exerciser. Also, it doesn't matter which plug goes into each socket.

At the other end of the lead wire, there is a plug that looks like the sort of USB plug you would see in a computer or a mobile phone. Insert this plug into the bottom of the control unit, making sure that the little arrow on the front of the plug is towards the front of the unit.

After you perform these setup instructions, your iTouch Sure Pelvic Floor Exerciser will be ready for use.

Watch more videos about the iTouch Sure Pelvic Floor Exerciser from TensCare:    • iTouch Sure Pelvic Floor Exerciser | ...  

#itouchsurepelvicfloorexerciser #pelvicfloorexerciser #tenscare

Subscribe to TensCare:    / @tenscareltdepsom  

Like us on Facebook:   / tenscareltd  
Follow us on Twitter:   / tenscareltd