Скачать или смотреть How Much To Manual Swap A 350z + Process

In this video I talk about how much it cost me to do the manual swap, it was under $1000AUD. I all so talk you through the basic process of removing the auto parts, installing the manual parts and the basic wiring to start. I have done a full break down video on how to, check the video out here - (Installation video -    • HOW TO Manual Swap 350Z (INSTALLATION & WI...  )



WIRING - (Basic wiring) I show you how to wire the car so you are able to start the car without running the clutch safety switch. This is still using the auto wiring harness (5AT) and auto ECU. This wiring is for a 2003 350Z, you keep the speedo, but loose the reverse lights and cruise control.
WIRING GUIDE 2003 350Z:
Fuse box next to battery
Release the IPDM (Intelligent Power Distribution Module)
Go to plug E8
Cut pin 45 (Yellow with Red stripe, 2003 350Z)
Connect constant power to pin 45

WIRING IS DIFFERENT FOR OTHER YEARS.



Parts required for swap.
Transmission
Pressure plate
Flywheel
Clutch
Clutch aligning tool
Clutch lines
Clutch master cylinder
Clutch slave cylinder
Clutch pedal
Spigot bearing (Manual)
Spigot bearing puller
Flywheel bolts
Pressure plate bolts
MT Brake pedal
MT Driveshaft
MT Interior trim
Shifter
Clutch fluid
Manual transmission fluid


Check out my Facebook and Instagram for more updates
Facebook -   / braydonboof