Checking the resistance on Axial and CB Heaters

Описание к видео Checking the resistance on Axial and CB Heaters

TUTCO Farnam engineer, Jordi Enriquez-Ortiz demonstrates how to test the resistance on our Axial Fan Heater and a CB Heater. When tested with a multimeter, the measurement reading should match your drawing specifications. The two-circuit, single-phase CB heater shares a common wire between the two circuits. and additional wires that are specific to the circuits. To properly test this heater, one lead is attached to the common wire and the second to the wire for each circuit. The readings should be approximately equal.

Комментарии

Информация по комментариям в разработке

Похожие видео