DIY Cable Carrier for Homemade CNC Router

Описание к видео DIY Cable Carrier for Homemade CNC Router

This is a simple cable carrier ( E-Chain ) that I designed using Google SketchUp. Rendering was done with Maxwell Render and G-Code was generated with SketchUCam ( Thank You Phlatboyz.com ). This cable carrier design doesn't require offsets or pocketing on the CNC. There's no need for screws, pins, snap joints or glue to put together. The carrier locks it self in place as you assemble it. I used 1/8" hardboard with an 1/8" bit for this first run but any hard plastic would be a better choice.

DXF files are available here http://www.cnczone.com/forums/videos/...

Комментарии

Информация по комментариям в разработке

Похожие видео