Скачать или смотреть How to Build a Mid-Century Modern Sideboard/Credenza/Buffet/Media Console

In this video, I’ll show you how to build this sideboard/hutch/entry cabinet…you get the idea! It has plenty of uses and tons of storage.

If you’re into mid century modern vibes then you will love this build.

I partnered with @wagner to bring you the free plans!

If you are building any type of furniture a paint/finish sprayer is going to be your best friend. It truly makes the smoothest finish.

I used the Wagner Earlex 500. It's an HVLP spray system, so it's very easy to use and extremely easy to clean

I hope you enjoy building this cabinet with me. Let me know what you think in the comments.

Free plans here:
https://learn.kregtool.com/plans/side...

Follow Built by Bec on:
https://www.instagram.com/builtbybecd...

Tools and Materials

Tools
Kreg pocket jig
Track saw/ table saw
Drill
Optional: router
Optional: jigsaw

Materials
Pine project panel, 1 x 18” x 6’ (1)
Pine project panel, 1 x 16” x 6’ (5)
Pine board, 2 x 2 x 8’ (2)
Plywood, 1/4” x 2’ x 4’ (1)
1 1/4” pocket screws (50)
Paint/stain of choice
Wood glue
Figure 8 fasteners
Forstner bit slightly large than figure 8 fasteners
Set of 10” drawer slides (3)
Set of inset door hinges (2)
Hardware of choice(5)
Sandpaper
1” spax screws (6)
Optional: Taper Jig
Optional: 3/4” Roundover bit
Optional: 3/8” roundover bit

Chapters
00:00 Introduction
00:26 Rounding over the legs
00:41 Attaching the side panels to the legs
1:30 Attaching the bottom & back
2:03 Attaching the center dividers
02:17 Cutting the rounded corners
02:45 Rounding over the top
03:07 Attaching the top to the base
03:36 Installing drawer slides
04:13 Building the drawer box
05:49 Installing the doors
06:52 Installing drawer fronts
07:52 Using my favorite paint sprayer
11:09 Finished cabinet.