MOD GUIDE: Elite 2.0 Motoblitz

The Nerf Elite 2.0 Motoblitz is one of the better releases from Hasbro in a while, combining a Rayven with a master-keyed air blaster up front. That being said, there are some simple mods, that can take this flywheeler to the next level.

Featuring a custom 3D-printed cage, Fang ReVAMPeds, and Daybreak flywheels, this 2S build will bump Performance up to HvZ or Superstock levels. Additionally, the "Blitz" can be easily modded with a simple turn of the screw, allowing for a more powerful scattershot panic button.

As always, we try our best to make our guides "crystal clear," so let us know if you have any questions so that we can make corrections and improve our tutorials.

Get the Nerf Elite 2.0 Motoblitz at select Targets and on Target.com:
https://www.target.com/p/nerf-elite-2...

Want to get started? Save 10% with a complete Motoblitz mod kit:
https://outofdarts.com/products/elite...

All other mod parts and accessories are available on the shop here:
https://outofdarts.com/search?q=motob...

FAQ & Corrections:
-If you have any questions about products we sell on the shop, don't hesitate to shoot us an email: [email protected]
-

0:00 Opening & Introduction
0:39 LiPo Safety Brief
1:01 Materials & Supplies Needed
2:39 Tools Required & Recommended
4:07 Included in the Kit
5:17 Blaster Disassembly
8:00 A Note on Flywheel Spacing
8:44 Blaster Demolition - Right Shell
12:22 Blaster Demolition - Left Shell
13:24 Blaster Demolition - Battery Tray
14:34 Blaster Demolition - Battery Door
15:34 Installing the Rev Switch
16: 45 Assembling the Flywheel Cage
18:47 Wiring the Flywheel Cage
21:44 Wiring the Rev Switch
24:25 Retaining the Wiring
26:18 Wiring the XT-60 connector
29:32 OPTIONAL - Installing the Short Dart Pusher
30:57 Partial Reassembly
31:31 Testing the Circuit
32:03 OPTIONAL - Modding the Short Dart Adapter
33:29 Firing Demo
34:07 OPTIONAL - Modding the Air Blaster
37:55 Reassembling the Blaster
39:49 Installing the LiPo & Alarm
40:37 Closing Remarks

Out of Darts, run by Luke, is a one-stop nerf-modding hobby shop. We carry all the supplies, tool accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 Prusa printers. Check out our site below for guides, build lists, and resources.

Please subscribe for more!
http://tinyurl.com/jnuot5d

My web store:
https://www.outofdarts.com

Product questions?
[email protected]

Follow me on Instagram for sneak peeks:
  / outofdarts  

Edited by J Perry Heun, Out of Darts Video Editor