Dynam Primo Trainer STOL Bigfoot 4S 1450mm w/ Flaps

https://www.dynamrc.com/products/prim...

The Dynam Primo Trainer is an exceptional RC aircraft for beginner pilots. It is the upgraded version (V2) of the Dynam Primo Trainer. This new version includes a Tomcat Skylord 40 Amp ESC, pre-installed flaps, and pre-installed flap servos. With its giant tundra wheels, the Dynam Primo is a great high-wing trainer molded after the super cubs the gifted bush pilots of Alaska might use where taking off and landing in less-than-ideal runways is a way of life. This Primo trainer can accommodate virtually any flying surface you may require. And what bush pilot would ever dare such treacherous runways without flaps? The Dynam Primo includes working flaps to minimize your takeoff and landing rollout if space is a concern.

Specifications

Wingspan: 1450mm (57in)
Overall Length: 1014mm (39.9in)
Flying Weight: 1660g (58.5oz)
Wing Loading: 51.08g/dm²
CG (Center of Gravity): 55-60mm from the leading edge of the wing at the root
Power System: Detrum BM3720-650KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 3A-BEC
Propeller: 2-blade propeller 13*6
Servo: 6x 9g micro servos
Landing Gear: Fixed
Required Transmitter: GAVIN-8C 2.4Ghz 8-Channel or above (required)
Required Receiver: MSR66A 6CH 2.4Ghz (required)
Required Battery: 4S 14.8V 2200mAh Li-Po 25C (required)
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: Yes
Approx. Flying Time: 8 minutes
Material: EPO Foam
Skill Level: Beginner
Assembly Time: 1 hour
Age Level: 14+
Recommended Environment: Outdoor
Aircraft Type: Trainer