DIY Macrame wall hanging TRIPLE plant holder pattern | Triple Macrame Plant Hanger | TUTORIAL

Hey there! Today I'm so excited to share this beautiful Macrame Wall Hanging Triple Plant Holder.

This took me a very long time to record so I hope all the instructions are clear and you can follow through. I will show you every step so you can pause, rewind and re-watch as many times as you need.

If you are new to macrame watch my basic macrame knots video tutorial:

   • 6 Basic macrame knots | Beginners | T...  

This DIY triple macrame plant hanger pattern can display three plants at a time It’s made with cotton cord and can hold pots with a base diameter up to 4 inches.

Materials:
- 4mm single strand cotton cord (start by cutting 10 strands 13ft/4m long and 16 strands 11ft/3.5m long.
- wooden dowel or wooden stick (I used a 24inch/61cm long dowel but you can use a shorter dowel with at least 19 inches/48 cm).
- scissors
- measuring tape

Measurements:
The finished size of the wall hanging triple plant holder (including the hanging loop) is going to be about 3ft 4inch/ 1m long. However, you can cut the fringes at the bottom shorter or longer. The wooden dowel used is about 24inch/61cm.

FOR MORE DIY MACRAME PROJECTS, VISIT:
https://elocreations.com/

MY LINKS:

  / elocreations_  
  / elocreations  
  / elo-creations-111696360569153  

Thanks for watching! If you liked the video click thumbs up and SUBSCRIBE to my channel for more videos.

Cheers, Elodie