Скачать или смотреть DIY Epoxy Poured Cribbage Board - Step By Step Video

How to make an epoxy poured cribbage board.
Follow me on instagram for more projects: CustomMaineSlabs

For measuring how much epoxy to use:
1. Measure length of area that will be poured - write down number
2. Starting at top or bottom of area to be poured: measure width of poured area every 2 inches and write down number.
3. Add up every width measured and divide by number of measurements taken (this will be your average width)
4. measure depth of pour - write down number
5. https://www.omnicalculator.com/math/v... - use this link to convert inches into liters.

For drilling peg holes:
Draw starting line: each row will have a hole 1/2" apart beginning 1/2" from the edge of the board. Each row is 1/5" apart. I grouped rows into groups of 5. There is a 1/2" gap in between groupings of 5. In total, there were 361 holes for playing (120 holes in columns of 3, and a finishing hole). I also drilled 7 rows of 3 for keeping score.

Notes: Stir epoxy for at least 15-20 mins before pouring (with color added). When sanding, I start at 80 grit and work my way up to 320 grit, making sure not to skip any grits along the way. This eliminates any sanding marks that can be seen at the end.

Music: Acoustic covers of -
Sultans of Swing by Dire Straits
Walking on the Moon by The Police
316 by Van Halen
Breakdown by Tom Petty