How to Replace Front Brake Caliper 2011-2015 Chevrolet Cruze

Buy Now!
New Brake Caliper from 1AAuto.com https://trq.video/ia-1ABCR00686

This video shows you how to install a front brake caliper on your 2011-2015 Chevrolet Cruze. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.

This repair was done on a 2013 Chevrolet Cruze LT 1.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze

Tools you will need:
• 18mm Wrench
• 10mm Socket https://trq.video/oR3-1AXAA00017
• 11mm Socket https://trq.video/oYX-1AXAA00015
• 14mm Socket https://trq.video/oYX-1AXAA00015
• 18mm Socket
• 19mm Socket
• Brake Caliper Hanger https://trq.video/ocP-1AXAA00439
• Pliers
• Ratchet https://trq.video/o6o-1AXAA00016
• Torque Wrench https://trq.video/oFK-1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Gloves https://trq.video/ohJ-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/or7-1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Cruze 2011-2015 1st Gen:    • Chevy Cruze 2011-2015 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.