2000-2006 TUNDRA STEERING RACK BUSHING REPLACEMENT - DIY

Link to the Polyurethane Steering Rack Bushing kits on Amazon:
https://amzn.to/2Y9KMuR or https://amzn.to/2VQbQSw
Link to the Sil-Glyde: https://amzn.to/2JeW7pi
Link to the Ball Joint Press I should have used: https://amzn.to/2LmUBUQ
Link to the Milwaukee High Torque Impact Wrench: https://amzn.to/2DOjrqi
Impact Wobble Extensions: https://amzn.to/2LlZqh1

Just another video showing how to replace the steering rack bushings on a 2004 Tundra DoubleCab. This is the same for 2000-2006 Tundras and Sequoias. It took me about 2 hours including filming and repositioning the camera. A ball joint press tool kit or a torch would have made the job easier. (These steering rack bushings were a little stubborn). If you use a torch, make sure you have a fire extinguisher nearby. This will fix your sloppy loose steering that is a common problem on these vehicles. This is also the same or very similar to 1996 - 2002 4Runner and the 1996 - 2004 Tacoma.
A front end alignment is recommended after doing this repair.
It's not necessary to remove the sway bar or the tie rod end.
Tools needed:
22mm wrenches and/or socket
19mm wrenches and/or socket
1/2" breaker bar
Screwdrivers and/or pry bars
C-clamp or Vice Grip Clamp or a Ball Joint Press Tool Kit
Sil-Glyde or Silicone Based Grease or Paste

Thanks for watching!
Please Subscribe!
-Dan the Fix it Man

Song used in the video:
'Show your Love' by Otis McDonald

As an Amazon Associate I earn from qualifying purchases.