2019-2023 Sierra/Silverado: Leveling Kit Install (2" Spacer by Skyjacker)

Complete start to finish installation of a Skyjacker 2" Spacer Leveling Kit on a 2020 GMC Sierra 1500 4WD pickup. See before and after measurements. Comment below with the tire size and wheel offset you were able to use. Any rubbing? Any other modifications? Same process for Yukon, Tahoe, Silverado, Suburban. 2019, 2020, 2021, 2022, 2023.

Visit https://www.masterjacks.com/videos/20... for Amazon part & tool links.

Amazon Affiliate Links
Lower Spacer 2" Kit https://amzn.to/3VHH75Z
Upper Spacer 2" Kit https://amzn.to/3PdMffH
Brakleen https://amzn.to/3TyKoCF
Upper strut spacer leveling kit https://amzn.to/3IpwD6r (not shown in this video)

The lower spacer-style kit was an easy install. A large wire loom is routed directly over the driver's side strut mount, which would make the upper donut-style kit a little more work.

At the time I of this video, there was not a 2020 kit available from Skyjacker. I installed the 2019 kit without any problems. Post-installation, I had an alignment done and was happy to find the only adjustment necessary was toe. It was slightly positive and easily brought back into spec.

Job Details:
Parts: Skyjacker 2 in. Cast Steel Strut Spacer Leveling Kit, brake/parts cleaner
Tools: tape measure, small sledge hammer, flat head screwdriver, 10mm, 15mm, 18mm, 21mm, 22mm, impact gun, torque wrench
Difficulty: moderate
Time: Approx 1 hr + alignment

CHAPTERS
0:00 Intro
0:07 Before Measurements
0:17 Disassembly
1:51 Spacer Install
2:22 Reassembly
3:12 LH Side at High Speed
3:53 Sway Bar Link Nuts
4:08 After Measurements
4:22 Alignment